B3F-4055歐姆龍級小型微動(dòng)開關(guān)*
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
insert a contact protection circuit where necessary. The
When soldering, make sure that the temperature of the
soldering iron tip is not higher than 300°C, and complete the
When using automatic soldering baths, we recommend
soldering at 260°C ±5°C within 5 seconds. Make sure that the
liquid surface of the solder does not flow over the edge of theboard.
When soldering terminals manually, perform soldering within 3
seconds at iron tip temperature not higher than 350°C. Do not
apply any external force for at least 1 minute after soldering.
When applying solder, keep the solder away from the case of
the Switch and do not allow solder or flux to flow into the case.

B3F-4055歐姆龍級小型微動(dòng)開關(guān)*